Westin's Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4" wide recessed step area. Platinum 4 Oval Nerf Step Bars are vehicle specific applications that feature a no-drill installation. Learn More

Westins Truck Bed Mat is designed to line and protect your trucks bed from damage typically caused by direct contact with cargo. “Custom Fit” Bed Mat is heat molded for specific vehicle applications and are available for short bed and long bed trucks. Bed Mat is made in the USA of 100% recycled heavy weight rubber and feature a ribbed non-slip surface to help keep cargo in its place. Backed by a 3-year warranty. Learn More

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions. Learn More

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Learn More

If you've seen your Jeep's hood 'flutter' while cruising down the road at speed, it's likely because the stock hood latches have stretched or deteriorated. DV8's patented RocKlaw Hood Catch System are made from a rigid die-cast which eliminates the flutter. They are height-adjustable to allow for a precise tension. Our RocKlaw solution is finished in UV-resistant, semi-gloss black powder coating for maximum durability. Comes with high-quality stainless steel mounting hardware. Learn More

DV8 Off Road Rear Black Powdercoated Aluminum finished inner fender for 2018-present Jeep Wrangler JL, are designed to reseal your engine compartment when using aftermarket fenders, clean up your inner fender, and provide better air flow where it counts. Learn More

The DV8 Offroad FBJL-10 front bumper was designed specifically for the Jeep JL and Gladiator. This is DV8s most modular bumper and comes with the full length wings and a stubby center section. It can also accommodate a 12,000 lbs winch and comes with a winch delete plate. Even the bull bar is modular, and to top it all off it accommodates fog lights. Modular design. Comes with all variations. Accommodates a 12,000 lbs winch. Stainless steel button head hardware. Functional design. Learn More

DV8 Off Road Rock Skins can be used with any JL step or slider and contour around either factory or aftermarket fenders. Learn More

DV8 Off Road ABJL-01 bracket allows for the mounting of any DV8 Off Road Jeep JK front bumper to the Jeep JL frame with no drilling Learn More

Wiring Harness w/Relay And Switch DV8 Off Road Learn More

The Jeep JK Mesh Grille installs easily as a single unit and is a great way to dress up the front end of your Jeep and helps keep the bugs out of its teeth. Also available in chromed stainless steel. Learn More

Jeep JL and JK Hinge Mounted Foot Pegs (Set of 2). The DV8 STJL-02 was designed to provide a stable point just outside of the door of your Jeep to kick a foot out and enjoy a doorless ride even more! Details: Made from 3/16 inch Steel, Powdercoated, Lock In Design, Sold In Pairs, Bolt On Installation. Learn More

DEI has developed an effective tool to tighten stainless steel locking ties. This tool saves time and hassle while providing a professional looking result. Simply slide the tool on the end of any ¼" nut driver, engage the tie, and twist. This gets the tie nice and secure without the hassle. Learn More

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat. Learn More

DV8 Off Road LED Mirror Housing allows drivers to have a wider range of visibility at night. LEDs are built into the mirror housings and are angled slightly outward from the center of the Jeep to promote a better field of view. DV8 Off Road LED mirrors allow for a safer drive on dark roads and better visibility during late night Off Road excursions. The DV8 mirror housings also work as a turn signal to replace the factory fender signals when moving to aftermarket fenders. Learn More

DV8 Offroad Jeep JL Replacement Grill, Black. The DV8 Offroad GRJL-01 replacement grill adds a menacing look to the front end of your ride. With the JL's larger 9 inch headlights, the angry eye look has never been so mean. Details: Replaces OEM grill, Easy to paint, Easy install. Learn More

DV8 Off Road Armor Fenders were designed for maximum clearance when traversing narrow passages that would rip off an ordinary fender. Learn More

DV8 Off Road Truck Rear Bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas and 2 shackle mount points. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Learn More

DV8 Off Road Truck Rear Bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas and 2 shackle mount points. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Learn More

DV8 Off Road Flat Fenders provide more tire clearance and more ability to flex. They come with internal bracing to ensure strength and durability. Our fenders come in a gloss black color and can be painted to match or left as is. Learn More

DV8's Hood Hold Downs (in standard and lockable versions) can be upgraded with an optional black turnbuckle to replace the standard silver color. Learn More

DV8 Off Road Plated Side Step Rock Sliders use a boxed in plated design that provides a rigid rock slider and the step will make struggling to get into your lifted JL a thing of the past. Learn More

Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove. Learn More

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Learn More

FDGL-02 2018+ Jeep Gladiator Armor Fenders (Set of 4). The DV8 Offroad FDGL-02 Armor Fenders were designed for maximum clearance when traversing narrow passages that would rip off an ordinary fender. They bolt on with no drilling required and feature a turn signal light that can integrate into the factory harness. Features: Slim design, Textured 3 stage powdercoat, solid steel construction, Light weight, Bolt on installation, Standard DV8 warranty, Aluminum vents can be color keyed to the Jeep. Learn More

DV8 Off Road Tailgate Mounted Tire Carrier replaces the weakest link on the OEM spare tire mounting system, unlike Jeeps of the past the JL features a cast steel internal tailgate structure. This means that it is much stronger and more capable of handling heavier loads. The DV8 Tailgate Mounted Tire Carrier replaces the factory bracket that connects the spare to the tailgate itself. It also makes the mounting system adjustable to accommodate up to a 35 inch tire and wheel combo. Learn More