The DV8 Offroad FBJL-10 front bumper was designed specifically for the Jeep JL and Gladiator. This is DV8s most modular bumper and comes with the full length wings and a stubby center section. It can also accommodate a 12,000 lbs winch and comes with a winch delete plate. Even the bull bar is modular, and to top it all off it accommodates fog lights. Modular design. Comes with all variations. Accommodates a 12,000 lbs winch. Stainless steel button head hardware. Functional design. Learn More

DV8 Off Road ABJL-01 bracket allows for the mounting of any DV8 Off Road Jeep JK front bumper to the Jeep JL frame with no drilling Learn More

Wiring Harness w/Relay And Switch DV8 Off Road Learn More

The Jeep JK Mesh Grille installs easily as a single unit and is a great way to dress up the front end of your Jeep and helps keep the bugs out of its teeth. Also available in chromed stainless steel. Learn More

The DV8 FDJL-03 fender delete kit was designed to maximize tire clearance and completely eliminate the factory fenders. Eliminating the fenders keeps the body of the Jeep further away from obstacles such as trees rocks and boulders and allows you to squeeze through tight spots that would be impossible to get through with a full width Jeep. Laser cut 3/16 steel Form fitting Textured powdercoat Closes gaps left after removing fenders 100% bolt on design Learn More

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat. Learn More

DV8's SPJL-10 skid plate is designed to protect your Dana 44 factory rear axle housing. With the axle one of the most brutalized pieces off-road, our 3/16 inch plate design will offer the most defense against the rocks. With our 100 percent bolts on design, it is a simple and effective way to keep you on the trail. Details: 2018-Present Jeep JL Rear Diff Skid Plate D44, 3/16 inch plate steel, Differential and axle tube protection, 100 percent Bolt on application, Standard DV8 Warranty. Learn More

DV8 Offroad Jeep JL Replacement Grill, Black. The DV8 Offroad GRJL-01 replacement grill adds a menacing look to the front end of your ride. With the JL's larger 9 inch headlights, the angry eye look has never been so mean. Details: Replaces OEM grill, Easy to paint, Easy install. Learn More

DV8 Off Road Armor Fenders were designed for maximum clearance when traversing narrow passages that would rip off an ordinary fender. Learn More

DV8 Off Road Truck Rear Bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas and 2 shackle mount points. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Learn More

DV8 Off Road Truck Rear Bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas and 2 shackle mount points. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Learn More

DV8 Off Road Flat Fenders provide more tire clearance and more ability to flex. They come with internal bracing to ensure strength and durability. Our fenders come in a gloss black color and can be painted to match or left as is. Learn More

DV8's Hood Hold Downs (in standard and lockable versions) can be upgraded with an optional black turnbuckle to replace the standard silver color. Learn More

Made from extruded aluminum, they are black anodized and come with raised brushed accent bars to ensure a grippy mount into (or dismount from) your Jeep Learn More

Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove. Learn More

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Learn More

FDGL-02 2018+ Jeep Gladiator Armor Fenders (Set of 4). The DV8 Offroad FDGL-02 Armor Fenders were designed for maximum clearance when traversing narrow passages that would rip off an ordinary fender. They bolt on with no drilling required and feature a turn signal light that can integrate into the factory harness. Features: Slim design, Textured 3 stage powdercoat, solid steel construction, Light weight, Bolt on installation, Standard DV8 warranty, Aluminum vents can be color keyed to the Jeep. Learn More

DV8 Off Road Tailgate Mounted Tire Carrier replaces the weakest link on the OEM spare tire mounting system, unlike Jeeps of the past the JL features a cast steel internal tailgate structure. This means that it is much stronger and more capable of handling heavier loads. The DV8 Tailgate Mounted Tire Carrier replaces the factory bracket that connects the spare to the tailgate itself. It also makes the mounting system adjustable to accommodate up to a 35 inch tire and wheel combo. Learn More

DV8 Off Road Front Black Powdercoated Aluminum finished inner fender for 2018-present Jeep Wrangler JL, are designed to reseal your engine compartment when using aftermarket fenders, clean up your inner fender, and provide better air flow where it counts. Learn More

DV8 Off Road Truck Rear Bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas and 2 shackle mount points. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Learn More

Titanium Spark Plug Boot Protectors are the latest in thermal protection technology. Developed from a unique material mined from lava rock, this material is naturally resistant to heat, chemicals, abrasions and contaminants. The material is stranded and woven into a tight, proprietary style weave for added durability and strength, yet is pliable enough to provide a universal fit for straight or angled boots. Learn More

DV8 Off Road Front Black Powdercoated Aluminum finished, non-lighted inner fenders for 2007-2018 Jeep Wrangler JK, are designed to reseal your engine compartment when using aftermarket fenders, clean up your inner fender, and provide better air flow where it counts. Our inner fenders also allow easy access to the shocks and do not require for the fender and inner fender to be removed like our competitors! Set of left and right inner fenders. Learn More

Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look. Learn More

Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses. Learn More

DV8's SPJL-11 skid plate is designed to protect your Dana 44 factory front axle housing. With the axle one of the most brutalized pieces off-road, our 3/16 inch plate design will offer the most defense against the rocks. With our 100 percent bolts on design, it is a simple and effective way to keep you on the trail. Details: 2018-Present Jeep JL Front Diff Skid Plate D44, 3/16 inch plate steel, Differential protection, 100 percent Bolt on application, Standard DV8 Warranty. Learn More

Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove. Learn More

Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses. Learn More

DV8 Off Road Tramp Stamp fits over the raised vent area in the center of the tailgate. These are very useful for those who have deleted or relocated the spare tire. CNC-laser cut from 3/16 inch steel the stamp comes powder coated in a textured black finish and installs easily using the stock tire carrier mounting bolts. Installing the tramp stamp requires removal of the stock air vent flaps, so that it may sit flat against the tailgate for a clean appearance. Learn More