Axle Housing

Uni-Ball Assembly

Uni-Ball Assembly; Uni-Ball For 3-Links;

RockJock Uni-Balls for Front Axle Housings are used in 3-link suspension applications, where the passenger's side upper control arm has been eliminated and all of the suspension load is now being applied to the one axle housing mounting location. Our Uni-Balls press into the stock bushing holes on the casting side, driver's side ONLY) of the front differential housing and provide a durable solution that incorporates a 5/8 in. thru-bolt hole for heavier hardware. This Uni-Ball will press into a stock JK or a stock TJ/LJ/XJ/MJ/ZJ housing, as well as aftermarket replacement differentials from companies such as Dana, UD-60s), Dynatrac, East Coast Gear, Fusion 4x4 and Currie Enterprises, cast center housings ONLY, does not apply to 9 in. / fabricated style differentials). Additionally, "most in. aftermarket differentials that are intended for installation in a JL/JT vehicle, still retain the bushing specs. of a JK bushing, making this the applicable Uni-Ball to install in an aftermarket differential, again, cast center only, not 9 in. style going into a JL/JT., for STOCK JL/JT housings, see our RJ-301002-101 Uni-Ball. The mounting width of the center pivoting assembly is 2 in., to allow it to fit into the fork on JL/JT/JK/TJ/LJ/XJ/MJ/XJ front upper control arm, however, the 5/8 in. thru-bolt hole will require drilling of the bolt hole in the control arm fork. Uni-Balls feature a sealed bearing assembly, so no greasing is required. Finish is clear zinc plating.

RockJock by John Currie's roots run deep as jeeping has been a love of the Currie family for decades. In his off-roading adventures, John pushed the limits of his vehicles coming to the realization of the shortcomings of the equipment. Thus it became John's goal to design and build the best-performing, strongest, most durable products on the market. A Jeep suspension upgrade product line was first developed in the 1980s based around Jeep CJ and YJ vehicles. Fast forward to 1998 and John's off-road passion evolved into rock crawling competitions. In 2001, John Currie took home the 1st place trophy in the Extreme Rock Crawling Championship Series, in a RockJock equipped Jeep TJ Wrangler. This was the first of many victories for John and various RockJock equipped vehicles in numerous rock crawling, Ultra 4 and desert racing championships! RockJock continues to progress and innovate as new platforms of vehicles are introduced. From the JK Wrangler, the JL Wrangler and JT Gladiator, John Currie personally continues to design, build, test, sell, and install the finest, cutting-edge, high-end suspension, steering and towing components available.